"Listing" and "let search engines find your blog" settings - Blogger Help

"Listing" and "let search engines find your blog" settings - Blogger Help




Smokin' Seventeen: A Stephanie Plum Novel21The Lord of the Rings: The Motion Picture Trilogy (Extended Edition + Digital Copy) [Blu-ray]The Hunger GamesThe Hunger GamesDream With MeKindle, Wi-Fi, Graphite, 6" Display with New E Ink Pearl TechnologyTrue Grit (Blu-ray/DVD Combo + Digital Copy)Dear CupidBon IverKindle 3G, Free 3G + Wi-Fi, 3G Works Globally, Graphite, 6" Display with New E Ink Pearl TechnologyTrue Blood: The Complete Third SeasonIl VoloHDMI Cable 2M (6 Feet)

::::::::::::::::::::::To Get And Show The Ip Via Javascript:::::::::::::::::::::

To Get And Show The Ip Via Javascript


To show the ip via JavaScript




var ip= '<!--#echo var="REMOTE_ADDR"-->';
document.write("Your IP Address is :"+ip+" ");
________________________________________________________________________________
__________________
To show IP via ASP




request.ServerVariables("REMOTE_ADDR")
________________________________________________________________________________
__________________
TO SHOW IP VIA PHP


<?
$remote_address = getenv("REMOTE_ADDR");
echo "Your IP address is $remote_address.";
$browser_type = getenv("HTTP_USER_AGENT");
echo "You are using $browser_type.";
?>

::::::::::::::::::SECRET CODES for NOKIA:::::::::::::::::::::::::::::::::

With Nokia codes or Nokia secret codes you can access hidden features and gain information about your Nokia phone. Many of the Nokia codes are only normally used by Nokia engineers. Nokiainfo.net takes no responsibility for any data loss resulting in using these Nokia codes.

Nokia code Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that "All Calls" are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
12345 This is the default security code press and hold # Lets you switch between lines


--------------------

:::::::::How to Copy a Full DVD On 1 CD:::::::::::::::::::

Copy a full DVD movie on one disk Posted by DoMiN8ToR on Monday 5 March 2001A BIGPLUTER FAQ This FAQ will tell you how to copy a full DVD film onto one disk, with excellent video quality and sound. But before I get started you must have these programs in order to do it because without these you cannot do it cheaply, basically you would have to buy a dvd ripper and some very expensive disks. Programs needed: Dvd to Mpeg squeezer. Panasonic Plugins. Xing encoder and Xing player (Xing player optional as windows player can run them). You will probably find them at DVDSoft.net Once you have installed (here's help) all these programs correctly you have to apply the appropriate settings. 1.        Before you start the Dvd to Mpeg squeezer you have to initialize the encoder, then when the box appears you have to click on options. 2.        Click on the capture settings box. 3.        The frame rate must be 23.976fps. 4.        Maximum frame number must be set at 300,000. 5.        Leave a tick in the stop capturing by title change. 6.        Leaving a tick in add bands is optional as this is for the zoom function. 7.        No ticks in the other 2 boxes. 8.        Resize filter set to BiCubic filter. 9.        Interpolation mode set to No Interpolation. 10.     Then come out of that menu and go into MPV settings. 11.     This is the main part of the rip and you must get these settings exact or it will not fit on one disk. 12.     The Data Rate (kbits/sec) Video must be set to 600kbits/sec delete the number what's in and put that one in the Video. The Audio must read 224 and the System must say 824 and the Stream format must be MPEG1. 13.     Noise Reduction must be set to: Medium. Video filter must be set to: Adaptive. Level must be set to: Strongest. Color tone optional but I set it to TV. These are the settings for a full film rip and full match source taken from a Dvd. This is the amount of film you can put on: 1. 650 meg disk equals to 106 minutes of 2. 700 meg disk equals to 116 minutes of film. Now if a film is longer than 116 minutes you will have to encode the film at a lower meg rate. To do this you will have to encode the ripped Dvd down to an NTSC rip or even lower down to a PAL rip. This should put any film onto 1 disk then, but this will still be a very good quality. If you encode a film even lower than PAL say a 384k rip you could get up to 4 hours of film on 1 disk but the quality of the film degrades drastically but watch able from 7 feet away. This FAQ was written by Bigpluter and can be modified only by someone who has got a littlepluter, but if you do let me know ok. ONLY BIGPLUTER MAKES IT POSSIBLE. Reaction by fzkuno on Tuesday 6 March 2001seen as how the goal is not to make a vcd compliant Mpeg stream, why not compress the audio further.. 112 kbit/s does the trick for me.. and why not use DivX instead.. mpeg 1 video is not necessarily the best format, because much of the computing power will go into the bicubic filtering necessary to downscale the video to a cif format in OK quality. video: 640*320 (for widescreen)at 600kbit/s DivX lowmotion with a keyframe every 3 secs. bilinear filtering. and Audio: 112 kbit/s mp3 and you're all set..I choose DivX low motion because of the nature of the films I usually back up, but fastmotion could be applied as well. sure the quality of mpeg is good, because of the frequency of keyframes, (1/15 I think..) but the problem is the bicubic filtering, and the rescaling to 352*X it's just not too cool.. theres a version of flaskmpeg out there with DeCss built in.. that means you can rip directly from the DVD instead of having to copy it to the HD. FZ Kuno

:::::::::How to Copy a Full DVD On 1 CD:::::::::::::::::::

Copy a full DVD movie on one disk Posted by DoMiN8ToR on Monday 5 March 2001A BIGPLUTER FAQ This FAQ will tell you how to copy a full DVD film onto one disk, with excellent video quality and sound. But before I get started you must have these programs in order to do it because without these you cannot do it cheaply, basically you would have to buy a dvd ripper and some very expensive disks. Programs needed: Dvd to Mpeg squeezer. Panasonic Plugins. Xing encoder and Xing player (Xing player optional as windows player can run them). You will probably find them at DVDSoft.net Once you have installed (here's help) all these programs correctly you have to apply the appropriate settings. 1.        Before you start the Dvd to Mpeg squeezer you have to initialize the encoder, then when the box appears you have to click on options. 2.        Click on the capture settings box. 3.        The frame rate must be 23.976fps. 4.        Maximum frame number must be set at 300,000. 5.        Leave a tick in the stop capturing by title change. 6.        Leaving a tick in add bands is optional as this is for the zoom function. 7.        No ticks in the other 2 boxes. 8.        Resize filter set to BiCubic filter. 9.        Interpolation mode set to No Interpolation. 10.     Then come out of that menu and go into MPV settings. 11.     This is the main part of the rip and you must get these settings exact or it will not fit on one disk. 12.     The Data Rate (kbits/sec) Video must be set to 600kbits/sec delete the number what's in and put that one in the Video. The Audio must read 224 and the System must say 824 and the Stream format must be MPEG1. 13.     Noise Reduction must be set to: Medium. Video filter must be set to: Adaptive. Level must be set to: Strongest. Color tone optional but I set it to TV. These are the settings for a full film rip and full match source taken from a Dvd. This is the amount of film you can put on: 1. 650 meg disk equals to 106 minutes of 2. 700 meg disk equals to 116 minutes of film. Now if a film is longer than 116 minutes you will have to encode the film at a lower meg rate. To do this you will have to encode the ripped Dvd down to an NTSC rip or even lower down to a PAL rip. This should put any film onto 1 disk then, but this will still be a very good quality. If you encode a film even lower than PAL say a 384k rip you could get up to 4 hours of film on 1 disk but the quality of the film degrades drastically but watch able from 7 feet away. This FAQ was written by Bigpluter and can be modified only by someone who has got a littlepluter, but if you do let me know ok. ONLY BIGPLUTER MAKES IT POSSIBLE. Reaction by fzkuno on Tuesday 6 March 2001seen as how the goal is not to make a vcd compliant Mpeg stream, why not compress the audio further.. 112 kbit/s does the trick for me.. and why not use DivX instead.. mpeg 1 video is not necessarily the best format, because much of the computing power will go into the bicubic filtering necessary to downscale the video to a cif format in OK quality. video: 640*320 (for widescreen)at 600kbit/s DivX lowmotion with a keyframe every 3 secs. bilinear filtering. and Audio: 112 kbit/s mp3 and you're all set..I choose DivX low motion because of the nature of the films I usually back up, but fastmotion could be applied as well. sure the quality of mpeg is good, because of the frequency of keyframes, (1/15 I think..) but the problem is the bicubic filtering, and the rescaling to 352*X it's just not too cool.. theres a version of flaskmpeg out there with DeCss built in.. that means you can rip directly from the DVD instead of having to copy it to the HD. FZ Kuno

make a autorun file for CD??

If you wanna make a autorun file for that CD you are ready to burn just read this...

1) You open notepad

2) now you writ: [autorun]
OPEN=INSTALL\Setup_filename.EXE
ICON=INSTALL\Setup_filename.EXE

Now save it but not as a .txt file but as a .inf file.

But remember! The "Setup_filename.EXE" MUST be replaced with the name of the setup file. And you also need to rember that it is not all of the setup files there are called '.exe but some are called '.msi

3) Now burn your CD with the autorun .inf file included.

4) Now set the CD in you CD drive and wait for the autorun to begin or if nothing happens just double-click on the CD drive in "This Computer"