Thursday, 31 March 2011

how to crimp 8 pin lan wire ???


Pin 1 White with Orange
Pin 2 Orange
Pin 3 White with Green
Pin 4 Blue
Pin 5 White with Blue
Pin 6 Green
Pin 7 White with Brown
Pin 8 Brown
back side of kimp left 2 right

                                                                      RJ45 connector
                                                                         crimping_tool
                                                            cutting cable using crimping tool
                                                  cutting outer plastic through Wire Stripper          
                                                            
  after using wire stripper
                                        adjusting wires in proper sequence(one side of crossover cable)          
                                                  
                                
                                                   inserting UTP-CAT5 wire inside RJ45 connector
                           check wires pattern and are they properly inserted in RJ -45 connector
                                              way of insertion of connector in crimping tool
                                   proper insertion of connector in crimping pressing grooves
                                                                           crimping
                                                
                                                                             result
       Note: Try to find out the pattern of each cable strand (8 wires) in the connector. They are of crossover pattern. The straight through have same arrangement of strands as explained before.
Posted by at

5 comments:

  1. Tania KapoorFriday, 20 December 2013 at 01:21:00 GMT-8

    Thanks for share the RJ45 cable wiring punching process with the help of diagram crossover chart..

    Network Wiring

    ReplyDelete
  2. mahnoorburiTuesday, 29 October 2019 at 03:03:00 GMT-7

    BANGING MY HEAD AGAINST WALL...

    First of all, I am very grateful for this tutorial - utterly fantastic pictures of the step by step process. THANK YOU! :) "If" I can pull this off, it will save me a lot of money re-wiring my 1939 Singer 201-2. It's a beautiful machine well worth the trouble. BUT...and this is where the "if" comes in...I CANNOT budge one of the screws holding the motor housing to the machine, the two big screws behind the handwheel that you said are "tight". OMG, not even "tight", how about never, ever coming out of there! :( I managed to get one of them out by standing over the machine and leaning into the screwdriver as I turned. The other one isn't coming out of there and I'm afraid I am stripping the groove by my repeated efforts. If I can't get the motor housing off the machine, I can't re-wire it. If I can't re-wire it, the machine can't be used (wires are completely stripped down to bare wire). HEL
    wire stripping and crimping machine

    ReplyDelete
  3. jackiedavisSaturday, 25 April 2020 at 01:08:00 GMT-7

    You have done a great job. I will definitely dig it and personally recommend to my friends. I am confident they will be benefited from this site.
    ffp2 mask suppliers china

    ReplyDelete
  4. jackiedavisThursday, 1 July 2021 at 08:23:00 GMT-7

    his is actually the kind of information I have been trying to find. Thank you for writing this information.
    Kratom Store

    ReplyDelete
  5. jackiedavisThursday, 15 July 2021 at 10:36:00 GMT-7

    Hi there, I found your blog via Google while searching for such kinda informative post and your post looks very interesting for me.
    cbd gummies uk

    ReplyDelete

Subscribe to: Post Comments (Atom)